• Professional 1000mW Red, green & blue scanning laser light
• Approximately 200 preset patterns such as layers, tunnels, fences & waves
• DMX controllable
• Stunning laser lighting for DJs, discos, bands, bars, clubs and more

• Price quoted is for a 1 day hire (weekend classed as 1 day)

 

The Laserworld CS-1000RGB MKII show laser projector comes with a completely new designed compact housing, which is light weight and has a stable bracket. The bracket allows for different mounting positions: a hanging as well as a standing installation is possible - ideal for mobile DJs and temporary laser shows, but also for fixed installations at a truss or at the ceiling.

 

The Laserworld CS-1000RGB MKII is a full color RGB laser system with a total output power of up to 1,000 mW and a minimum output power of 800 mW. The red laser source at 650 nm has an output power of 200 mW, the green DPSS at 532 nm of 70 mW  and the royal-blue laser source at a wavelength of 445 nm has an output power of 530 mW. The laser sources ensure billiant colors and powerful laser beams. The projector has good beam specifications with a beam diameter of about 3 mm and beam divergence of 2.0 mrad. The galvo system has a scan speed of up to 30kpps.

 

Pattern size and the sensitivity of the microphone can be set by two rotary buttons on the rear side of the housing. 

 

Through DMX, in the automatic mode as well as in the sound-to-light mode about 200 preset patterns, like waves, tunnels, circles etc. can be projected in different colors and in various speed. If the automatic mode is active, the pre-programmed patterns run without assistance and in the music mode, the laser system projects according to the sound.

 

Next to the modi mentioned  above, this laser projector provides a master-slave-mode. Show lasers of the same series (slave projectors), connected via DMX to a main projector (master projector) project the same patterns like the master projector.

 

The Laserworld CS-1000RGB MKII is computer controllable through a professional ILDA interface. Thus own or pre-programmed lasershows, logos, texts or own graphics and animations can be shown in combination with a laser control software.

 

There are safety features like a key switch, an interlock interface and an on-off switch. 

The Laserworld CS-1000RGB MKII is ideal for professional applications and is perfectly suitable in bars, medium sized clubs and discos as well as for rental companies, mobile DJs, private use and in any other party location.

 

Specifications:
• Power Red: 200 mW / 650 nm
• Total Power typical: 1000 mW / Guaranteed power: 800 mW

• Power Green: 70 mW / 532 nm

• Power Blue: 530 mW / 445 nm

• Beam Specifications: ca. 3 mm / 2 mrad

• Laser Sources: Diode, DPSS Laser

• Laser Class: 4

• Operation Modes: auto, music, DMX, ILDA, master-slave

• Scanner: galvo system, 30 kpps@4°

• Scan Angle max.: 40°

• Basic Patterns: ca. 200 (layers, tunnels, fences, waves, etc.)

• Accessories: power cable, manual, key, interlock connector

• Power Supply: 85V - 250V AC

• Power Consumption: 60 W

• Dimensions: 220/155/145 mm

• Weight: 3.15 kg

LASERWORLD CS-1000RGB MKII RGB SCANNING LASER LIGHT DMX DJ DISCO CLUB HIRE

SKU: CS-1000RGBMKIIHIRE
£50.00Price
  • All prices quoted are for a 1 day hire of the equipment. A weekend hire is classed as 1 day, so if you are collecting on a Friday then the kit must be returned the following Monday during working hours.

    All hires must be collected and returned between 9-6pm Monday-Friday unless an appointment outside of these hours has been agreed.

    A deposit is required when renting any equipment. This deposit will be refunded to the customer upon satisfactory inspection of the kit when returned to store. If the cost of the equipment being hired amounts to less than £50 then the deposit will always be £50. If a hire totals more than £50 then the deposit will match this total cost, for example a £150 total hire would also require a £150 deposit.

    The customer who is collecting the hire from the store must also bring in two forms of ID with them, these being Passport AND Driving License. We will retain one of these for the duration of the hire and take a photocopy of the other. If you are unable to provide us with either of these, or do not wish to leave one with us, then a larger deposit amount can be agreed upon.

    Late returns are liable to an extra day's charge for each day that passes, so please contact us at the earliest opportunity if you are unable to return the equipment on the agreed date.

    The equipment supplied will be hired by the customer at their own risk.

     

    Al hire monies are personally guaranteed by the person signing for the equipment, even if representing another person or company.

     

    The hirer or signee is completely responsible for the safekeeping of any equipment plus any damage due to misuse.

     

    In the result of a hire not being returned by 7 days after the agreed return date, the hirer will be instructed to pay for the goods in full along with any additional costs incurred to Music Sound & Lighting.

    If you are wanting the equipment to be delivered, set up and/or collected then please contact us for a quote.

    Phone: 01684 437200

    Email: info@musicsoundandlighting.co.uk

FREE UK MAINLAND* NEXT WORKING DAY DELIVERY

SAME WORKING DAY DISPATCH IF ORDERED BEFORE 3PM

0

Please Like us on Facebook and Follow us on Twitter to keep up to date with all our latest news and offers.

Weekends & Evenings by Appointment

Telephone: 01684 437200

Company Number: 11016865

Northway Trading Estate

Tewkesbury

Northway Lane

Glos

Opening Hours: 9-6pm Monday - Friday

Unit 2

VAT Number: 283133709

GL20 8JH

©2019 Music Sound & Lighting Ltd. All rights reserved.